Download GitLab Enterprise Edition (EE)

Check if your server meets the hardware requirements. GitLab packages are built for 64bit systems. For 32bit OS, consider alternative installation methods.

1. Install and configure the necessary dependencies

If you install Postfix to send email please select 'Internet Site' during setup. Instead of using Postfix you can also use Sendmail or configure a custom SMTP server and configure it as an SMTP server.

On Centos 6 and 7, the commands below will also open HTTP and SSH access in the system firewall.

sudo apt-get install curl openssh-server ca-certificates postfix

2. Add the GitLab package server and install the package

curl https://packages.gitlab.com/install/repositories/gitlab/gitlab-ee/script.deb.sh | sudo bash
sudo apt-get install gitlab-ee

If you are not comfortable installing the repository through a piped script, you can find the entire script here and select and download the package manually and install using

dpkg -i gitlab-ee-XXX.deb

3. Configure and start GitLab

sudo gitlab-ctl reconfigure

4. Browse to the hostname and login

On your first visit, you'll be redirected to a password reset screen to provide the password for the initial administrator account. Enter your desired password and you'll be redirected back to the login screen.

The default account's username is root. Provide the password you created earlier and login. After login you can change the username if you wish.

For configuration and troubleshooting options please see the Omnibus GitLab documentation
If you are located in China, try using https://mirror.tuna.tsinghua.edu.cn/help/gitlab-ce/

Check if your server meets the hardware requirements. GitLab packages are built for 64bit systems. For 32bit OS, consider alternative installation methods.

1. Install and configure the necessary dependencies

If you install Postfix to send email please select 'Internet Site' during setup. Instead of using Postfix you can also use Sendmail or configure a custom SMTP server and configure it as an SMTP server.

On Centos 6 and 7, the commands below will also open HTTP and SSH access in the system firewall.

sudo apt-get install curl openssh-server ca-certificates postfix

2. Add the GitLab package server and install the package

curl https://packages.gitlab.com/install/repositories/gitlab/gitlab-ee/script.deb.sh | sudo bash
sudo apt-get install gitlab-ee

If you are not comfortable installing the repository through a piped script, you can find the entire script here and select and download the package manually and install using

dpkg -i gitlab-ee-XXX.deb

3. Configure and start GitLab

sudo gitlab-ctl reconfigure

4. Browse to the hostname and login

On your first visit, you'll be redirected to a password reset screen to provide the password for the initial administrator account. Enter your desired password and you'll be redirected back to the login screen.

The default account's username is root. Provide the password you created earlier and login. After login you can change the username if you wish.

For configuration and troubleshooting options please see the Omnibus GitLab documentation
If you are located in China, try using https://mirror.tuna.tsinghua.edu.cn/help/gitlab-ce/

Check if your server meets the hardware requirements. GitLab packages are built for 64bit systems. For 32bit OS, consider alternative installation methods.

1. Install and configure the necessary dependencies

If you install Postfix to send email please select 'Internet Site' during setup. Instead of using Postfix you can also use Sendmail or configure a custom SMTP server and configure it as an SMTP server.

On Centos 6 and 7, the commands below will also open HTTP and SSH access in the system firewall.

sudo apt-get install curl openssh-server ca-certificates postfix

2. Add the GitLab package server and install the package

curl https://packages.gitlab.com/install/repositories/gitlab/gitlab-ee/script.deb.sh | sudo bash
sudo apt-get install gitlab-ee

If you are not comfortable installing the repository through a piped script, you can find the entire script here and select and download the package manually and install using

dpkg -i gitlab-ee-XXX.deb

3. Configure and start GitLab

sudo gitlab-ctl reconfigure

4. Browse to the hostname and login

On your first visit, you'll be redirected to a password reset screen to provide the password for the initial administrator account. Enter your desired password and you'll be redirected back to the login screen.

The default account's username is root. Provide the password you created earlier and login. After login you can change the username if you wish.

For configuration and troubleshooting options please see the Omnibus GitLab documentation
If you are located in China, try using https://mirror.tuna.tsinghua.edu.cn/help/gitlab-ce/

Check if your server meets the hardware requirements. GitLab packages are built for 64bit systems. For 32bit OS, consider alternative installation methods.

1. Install and configure the necessary dependencies

If you install Postfix to send email please select 'Internet Site' during setup. Instead of using Postfix you can also use Sendmail or configure a custom SMTP server and configure it as an SMTP server.

On Centos 6 and 7, the commands below will also open HTTP and SSH access in the system firewall.

sudo apt-get install curl openssh-server ca-certificates postfix

2. Add the GitLab package server and install the package

curl https://packages.gitlab.com/install/repositories/gitlab/gitlab-ee/script.deb.sh | sudo bash
sudo apt-get install gitlab-ee

If you are not comfortable installing the repository through a piped script, you can find the entire script here and select and download the package manually and install using

dpkg -i gitlab-ee-XXX.deb

3. Configure and start GitLab

sudo gitlab-ctl reconfigure

4. Browse to the hostname and login

On your first visit, you'll be redirected to a password reset screen to provide the password for the initial administrator account. Enter your desired password and you'll be redirected back to the login screen.

The default account's username is root. Provide the password you created earlier and login. After login you can change the username if you wish.

For configuration and troubleshooting options please see the Omnibus GitLab documentation
If you are located in China, try using https://mirror.tuna.tsinghua.edu.cn/help/gitlab-ce/

Check if your server meets the hardware requirements. GitLab packages are built for 64bit systems. For 32bit OS, consider alternative installation methods.

1. Install and configure the necessary dependencies

If you install Postfix to send email please select 'Internet Site' during setup. Instead of using Postfix you can also use Sendmail or configure a custom SMTP server and configure it as an SMTP server.

On Centos 6 and 7, the commands below will also open HTTP and SSH access in the system firewall.

sudo apt-get install curl openssh-server ca-certificates postfix

2. Add the GitLab package server and install the package

curl https://packages.gitlab.com/install/repositories/gitlab/gitlab-ee/script.deb.sh | sudo bash
sudo apt-get install gitlab-ee

If you are not comfortable installing the repository through a piped script, you can find the entire script here and select and download the package manually and install using

dpkg -i gitlab-ee-XXX.deb

3. Configure and start GitLab

sudo gitlab-ctl reconfigure

4. Browse to the hostname and login

On your first visit, you'll be redirected to a password reset screen to provide the password for the initial administrator account. Enter your desired password and you'll be redirected back to the login screen.

The default account's username is root. Provide the password you created earlier and login. After login you can change the username if you wish.

For configuration and troubleshooting options please see the Omnibus GitLab documentation
If you are located in China, try using https://mirror.tuna.tsinghua.edu.cn/help/gitlab-ce/

Check if your server meets the hardware requirements. GitLab packages are built for 64bit systems. For 32bit OS, consider alternative installation methods.

1. Install and configure the necessary dependencies

If you install Postfix to send email please select 'Internet Site' during setup. Instead of using Postfix you can also use Sendmail or configure a custom SMTP server and configure it as an SMTP server.

On Centos 6 and 7, the commands below will also open HTTP and SSH access in the system firewall.

sudo yum install curl openssh-server postfix cronie
sudo service postfix start
sudo chkconfig postfix on
sudo lokkit -s http -s ssh

2. Add the GitLab package server and install the package

curl https://packages.gitlab.com/install/repositories/gitlab/gitlab-ee/script.rpm.sh | sudo bash
sudo yum install gitlab-ee

If you are not comfortable installing the repository through a piped script, you can find the entire script here and select and download the package manually and install using

rpm -i gitlab-ee-XXX.rpm

3. Configure and start GitLab

sudo gitlab-ctl reconfigure

4. Browse to the hostname and login

On your first visit, you'll be redirected to a password reset screen to provide the password for the initial administrator account. Enter your desired password and you'll be redirected back to the login screen.

The default account's username is root. Provide the password you created earlier and login. After login you can change the username if you wish.

For configuration and troubleshooting options please see the Omnibus GitLab documentation
If you are located in China, try using https://mirror.tuna.tsinghua.edu.cn/help/gitlab-ce/

Check if your server meets the hardware requirements. GitLab packages are built for 64bit systems. For 32bit OS, consider alternative installation methods.

1. Install and configure the necessary dependencies

If you install Postfix to send email please select 'Internet Site' during setup. Instead of using Postfix you can also use Sendmail or configure a custom SMTP server and configure it as an SMTP server.

On Centos 6 and 7, the commands below will also open HTTP and SSH access in the system firewall.

sudo yum install curl openssh-server
sudo systemctl enable sshd
sudo systemctl start sshd
sudo yum install postfix
sudo systemctl enable postfix
sudo systemctl start postfix
sudo firewall-cmd --permanent --add-service=http
sudo systemctl reload firewalld

2. Add the GitLab package server and install the package

curl https://packages.gitlab.com/install/repositories/gitlab/gitlab-ee/script.rpm.sh | sudo bash
sudo yum install gitlab-ee

If you are not comfortable installing the repository through a piped script, you can find the entire script here and select and download the package manually and install using

rpm -i gitlab-ee-XXX.rpm

3. Configure and start GitLab

sudo gitlab-ctl reconfigure

4. Browse to the hostname and login

On your first visit, you'll be redirected to a password reset screen to provide the password for the initial administrator account. Enter your desired password and you'll be redirected back to the login screen.

The default account's username is root. Provide the password you created earlier and login. After login you can change the username if you wish.

For configuration and troubleshooting options please see the Omnibus GitLab documentation
If you are located in China, try using https://mirror.tuna.tsinghua.edu.cn/help/gitlab-ce/

Check if your server meets the hardware requirements. GitLab packages are built for 64bit systems. For 32bit OS, consider alternative installation methods.

1. Install and configure the necessary dependencies

If you install Postfix to send email please select 'Internet Site' during setup. Instead of using Postfix you can also use Sendmail or configure a custom SMTP server and configure it as an SMTP server.

On Centos 6 and 7, the commands below will also open HTTP and SSH access in the system firewall.

sudo zypper install curl openSSH postfix
sudo systemctl enable sshd
sudo systemctl start sshd
sudo systemctl enable postfix
sudo systemctl start postfix
sudo yast2 firewall services add tcpport=80,443,22,25,465,587 udpport=80,443,22,25,465,587 zone=EXT
sudo rcSuSEfirewall2 restart

2. Add the GitLab package server and install the package

curl -sS https://packages.gitlab.com/install/repositories/gitlab/gitlab-ee/script.rpm.sh | sudo bash
sudo zypper install gitlab-ee

If you are not comfortable installing the repository through a piped script, you can find the entire script here and select and download the package manually and install using

curl -LJO https://packages.gitlab.com/gitlab/gitlab-ee/packages/opensuse/42.1/gitlab-ee-XXX.rpm/download
rpm -i gitlab-ee-XXX.rpm

3. Configure and start GitLab

sudo gitlab-ctl reconfigure

4. Browse to the hostname and login

On your first visit, you'll be redirected to a password reset screen to provide the password for the initial administrator account. Enter your desired password and you'll be redirected back to the login screen.

The default account's username is root. Provide the password you created earlier and login. After login you can change the username if you wish.

For configuration and troubleshooting options please see the Omnibus GitLab documentation
If you are located in China, try using https://mirror.tuna.tsinghua.edu.cn/help/gitlab-ce/

Check if your server meets the hardware requirements. GitLab packages are built for 64bit systems. For 32bit OS, consider alternative installation methods.

1. Install and configure the necessary dependencies

If you install Postfix to send email please select 'Internet Site' during setup. Instead of using Postfix you can also use Sendmail or configure a custom SMTP server and configure it as an SMTP server.

On Centos 6 and 7, the commands below will also open HTTP and SSH access in the system firewall.

sudo zypper install curl openSSH postfix
sudo systemctl enable sshd
sudo systemctl start sshd
sudo systemctl enable postfix
sudo systemctl start postfix
sudo yast2 firewall services add tcpport=80,443,22,25,465,587 udpport=80,443,22,25,465,587 zone=EXT
sudo rcSuSEfirewall2 restart

2. Add the GitLab package server and install the package

curl -sS https://packages.gitlab.com/install/repositories/gitlab/gitlab-ee/script.rpm.sh | sudo bash
sudo zypper install gitlab-ee

If you are not comfortable installing the repository through a piped script, you can find the entire script here and select and download the package manually and install using

curl -LJO https://packages.gitlab.com/gitlab/gitlab-ee/packages/opensuse/13.2/gitlab-ee-XXX.rpm/download
rpm -i gitlab-ee-XXX.rpm

3. Configure and start GitLab

sudo gitlab-ctl reconfigure

4. Browse to the hostname and login

On your first visit, you'll be redirected to a password reset screen to provide the password for the initial administrator account. Enter your desired password and you'll be redirected back to the login screen.

The default account's username is root. Provide the password you created earlier and login. After login you can change the username if you wish.

For configuration and troubleshooting options please see the Omnibus GitLab documentation
If you are located in China, try using https://mirror.tuna.tsinghua.edu.cn/help/gitlab-ce/